Henan Wheat Import And Export Company Limited
Advanced equipments with the best service!
Add to Cart
Introduction of airflow dryer machine
Airflow dryer widely used in straw briquette fuel, charcoal machine, sawdust pellet fuel, sawdust briquetting, agriculture and animal husbandry projects and other industries.As a drying equipment for drying wood sawdust,straw,cotton stalk,wheat straw,wood shavings,or agricultural waste to production Pellets,briquette as biomass fuels.
Airflow dryer uses the principle of instantaneous air drying, It has the advantages of high drying intensity, short drying time, less energy consumption, simple operation and good product quality. The starch dried by this equipment has the advantages of clean appearance, luster, high fineness, stable moisture content and small impurity pollution. The air dryer is suitable for drying powdery, flake and heat sensitive materials in starch, rice flour, food, medicine, chemical industry and other industries The equipment can achieve the best economic benefits with the least investment, the lowest energy consumption, the least manpower and site, and the fastest speed.
The new type of high-yield and energy-saving air dryer is a new type of air drying equipment which is improved on the basis of the original air dryer. It has been greatly improved in structure and performance, and has been highly recognized by users. What's more, the new type of air dryer can freely deform and combine according to the needs of production.
Technical parameters of airflow dryer machine
| Model | TYHG450 | TYHG650 | TYHG950 | TYHG1300 |
| Dryer diamter(mm) | 450 | 650 | 950 | 1300 |
| Feeding size(mm) | 2-20 | 2-20 | 2-20 | 2-20 |
| Feeding moisture content(%) | 10%-80% | 10%-80% | 10%-80% | 10%-80% |
| Diacharge moisture content(%) | 5% | 5% | 5% | 5% |
| Capacity(t/h) | 500 | 1200 | 2000 | 3200 |
| Power(kw) | 6.25 | 21.5 | 34.4 | 50.2 |
| Weight(kg) | 1550 | 5500 | 7500 | 11000 |
| Installation(m) | 6*1.5*4 | 8*1.5*4 | 15*2.5*5 | 20*4*5 |
Working principle of airflow dryer machine:
The raw materials enter the furnace through the pipe through the feed port, and the hot air around the pipe is pumped to saklone Li by the fan together with the hot air. The dried materials are discharged from the sand clone, and the waste hot gas and steam are discharged from the sand clone.
Operating procedures:
1. After installation, turn on the fan and check whether the fan rotation direction and feeding port suction are normal.
2. Check the flange joints to see if there is air leakage.
3. The cloth bags with opening at both ends are tied at the discharge port of the separator.
4. When the material to be dried is added into the feeding port, large particles must be screened out before drying, which is conducive to improving the drying speed.
5. Fuel is added into the furnace to ignite, and the fan is turned on. When the temperature at the air outlet reaches 150 ℃, the material is cut and dried.
6. Remove the large pieces of material at the slag outlet in time to facilitate feeding.
