Henan Wheat Import And Export Company Limited
Advanced equipments with the best service!
Add to Cart
Widely Used In Sawdust, Shaving,Cottonseed Hull, Corn Cob Press And Packing, One-Time Compressed Into A Bag
Company designs and manufactures various types of hydraulic baling press products, general-purpose hydraulic baling press for peanut shells, corn cobs, wood shavings, wood chip, gingko leaf, leaf tobacco, rice husk, straw, grass, paper, cotton, garment, plastics, wool, recyclable waste, waste bin, paper board, yarn, tobacco leaf, plastic, cloth, woven bags, knitted velvet, waste plastic bags all light bulbs, loose soft materials such as compression packaging materials, and greatly reduce the volume, increase the density, save up to 80% of the stack space, convenient transportation and storage.
The machine can be widely used in the compressed packaging of light foam loose materials such as cotton, chemical fiber, hemp, wool, grass, medicinal materials and recycled materials for convenient storage and transportation.
It adopts Hydraulic transmission control system,high automatic,stable speed,high yield,easy operation,widely used in sawdust, shaving,cottonseed hull, peanut shell, corn cob press and packing, one-time compressed into a bag,convenient storage,which can greatly reduce the trandportation cost,what is more,it will be loose easily after press.it also can be used in Green building material, agricultural fertilizer etc.
This machine is low failure rate and stable performance,it is can be normal work in low miosture content condition which will not be press in some fatory. Very suitable for using with auto-feeding system.It can be specially made according to customer's requirement.
Technical data
| Model | QZD-1200 |
| Voltage | 380v-50hz |
| Power | 17.2kw |
| Outside size | 3.5*3.3*3.55m |
| end product size | 750*480*250mm |
| end product weight | 15-25kg |
| shift capacity | 1000-1500kg |
| weight | 4500kg |
| Auto-feeder | 4-6m |
Installation and maintenance
The maintenance of the machine is a very important regular work, it should be in close cooperation with the extremely operation and overhaul, due to full-time personnel on duty inspection.
Matters needing attention and maintenance of baling machine:
1. Pay attention to the normal maintenance of the machine;
2. Regular maintenance and oil filling to ensure the matching of No. 46 hydraulic oil;
3. Tap the power supply according to the diagram, do not mix the three phase and two phase;
4. The hydraulic oil in the pumping station shall not be lower than the normal scale, nor exceed the scale limit;
5. The pressure gauge should be kept under 18MPa when normal;
6. Ensure safety and specially-assigned operation; strictly prohibit squeezing inflammable and explosive dangerous goods;
Matters needing attention
1. Please confirm the power used by the machine and do not plug in the wrong power.The machine adopts three - phase four wire system. The wire is earthed zero wire for leakage protection.
2. Do not touch the heating sheet directly with your hands.
3. Do not flush the machine with water. Operators should not work barefoot when the workplace is wet.
Remember to unplug the machine when not in use.
Don't change the parts of the machine at will.
6. Main parts should be lubricated with oil frequently.